What can be made from marble chips

For finishing work, such material as marble is very often used. This stone is relatively soft and easy to process, however defective or non-liquid parts are sometimes found in its production. Based on them, as well as their waste after processing the material, marble chips come out. It is a versatile building material with a wide range of uses.

Properties and varieties

Marble chips are a unique material that is used in various finishing works, as well as in construction or decoration. Based on it, the following is made:

  • mosaic floor coverings;
  • decorative elements for the interior;
  • monuments;
  • sculptures.

The material is a crushed crystal of different sizes. Such crystals are sorted into fractions, dried and dust is removed from the surface. Upon closer inspection, the material resembles granular sand.

According to its areas of application and decorative properties, it is divided into three categories:

Colored marbles are carbonate rocks. They can have different colors:

  • green;
  • pink;
  • red;
  • black;
  • yellow and more.

Marble production is unique in that it leaves virtually no waste. Almost all leftovers from the production of mineral blocks or defective materials are used to make marble chips. This finishing material is also called “living stone” in another way.

According to the size of the fractions, the crumb is of the following types:

  • flour – it has fractions ranging in size from 2.5 to 150 microns;
  • crushed stone from 10 to 20 mm in size;
  • sand ranging in size from 0.16 to 2.5 mm;
  • crumb from 2.5 to 10 mm.

The color of the crumb directly depends on the color of the marble from which it was obtained, as well as the impurities used. For example, bitumen or graphite gives the stone a blue, black or gray color, carbonate makes it brown or yellow. In some cases, marble sand is painted with special epoxy resistant paints during production. Thanks to this, you can get any desired shade.


This marble material has unique properties due to which it can be used for different purposes. For example, due to the ease of processing and color diversity, it is used to decorate surfaces, and is also used to make porcelain or ceramic products.

The material can be used in unlimited quantities, it is environmentally friendly and has a low radiation background.

For interior decoration, this material is often used in the manufacture of the following products:

  • steps;
  • floors;
  • window sills;
  • countertops.

For design purposes, the crumb is used to create stone decorative panels or winter gardens.

Mosaic coatings are good because they do not wear out, the service life depends on the quality, as well as the production technology of the marble mixture and the method of its installation, subsequent grinding and maintenance. The technology of their production was known in ancient times. The material is still relevant today.

All crumb-based products do not generate sparks when used, therefore, they can be successfully used even in fire or explosive areas.

Floor coverings

With the help of marble, it allows you to create unique and convenient solutions for the design of flooring. As a basis, a cement screed is usually used. On it, mark up the future drawing using glass or copper thin veins. Next, a mixture based on crumbs, water and cement is applied. If you use multi-colored material, the mosaic floor will be especially original.

Application in construction

The crumb is successfully applied in different spheres of construction. This is possible due to its qualities:

  • environmental friendliness;
  • ease of processing and grinding;
  • profitability;
  • color variety.

And the crumb has a unique property to be combined with other building materials. It is resistant to low temperatures, so it can be used not only for interior, but also for exterior decoration. For facade work, white material is usually used. It gives the exterior of the building a more attractive appearance.

Often the material is used in the manufacture of white cement, all kinds of additives for mortars, paints or mixtures. And it is also one of the key components in the production of products based on cast marble.

To properly apply a mixture based on marble chips to the surface, you need to follow a few simple rules:

  • turn off all heating and heating appliances that are in close or direct contact with the surface to be treated;
  • if work is carried out in an open area, do not expose to direct sunlight. Also, avoid high temperatures and high humidity;
  • properly prepare the surface, do not add foreign substances to the container with the composition.

Marble crumb is a durable material characterized by excellent wear resistance. With its help, you will create a reliable coating for different types of surfaces and make them more attractive.

Baby in landscape design

Marble chips, as well as mixtures based on the material, are often used to decorate garden plots, as well as other adjacent areas. This design has not only a decorative function, but also a practical one:

  • the soil will be protected from temperature changes and the growth of weeds will be slowed down;
  • if marble dust is used to decorate the lawn, water is less likely to stagnate on it and the soil does not dry out.

An interesting solution for landscape design using marble chips is the so-called dry stream, when a pond is imitated with its multi-colored varieties. It looks very original, and will give a special attraction in cases where it is impossible to provide a real reservoir on your site.

A huge advantage lies in the fact that the material is very easy to clean from contamination . It is enough just to collect the top, most contaminated layer, then rinse it with a powerful water pressure, installing a waterproof litter.

If you need to clean white material, you can take a simple bleach. The crumb is soaked in a basin or other container overnight in water and a little bleach is added. Periodically stir the contents with a long-handled broom or mop. Then the contents are washed and left to dry.

As you can see, marble chips are a unique environmentally friendly material with high performance characteristics. It is often used where the coating must be safe and able to withstand heavy loads. There are a lot of areas of use, but in construction and design such a crumb is simply irreplaceable.

See also:   Which aloe leaves are simple or compound

Rigid, but giving freedom in working with it – these seemingly contradictory qualities refer to the same material – marble, or more precisely, to marble chips. She is loved not only by decorators, but also by landscape designers. It is durable enough to be used as a walkway, patio or even driveway cover. Marble chips are preferred when it is necessary to create the effect of softness, which most types of pavement do not allow, due to their solidity. With the help of this noble material, the paths fit as organically as possible into the surrounding landscape. In the article, we will consider the main use of marble chips in landscape design.


Benefits of working with marble chips

  • Along with gravel paths, marble fits naturally into the design of Italian, French or English style homes. However, it should be noted here that marble also looks good in combination with modern forms, naturally softening the overly rigid lines of transitions from house to garden and from street to house
  • How marble chips will eventually look in the landscape depends entirely on the desire of the owner, since this material is plastic and has many colors. It can be either a romantic mood in white and pinkish tones, or a strict formal look in gray, or a cheerful multi-colored riot of bright colors.
  • The most valuable quality of marble chips, according to designers, is the ability to use it in a variety of conditions, in addition, it is easy to move. Need a new flower garden? Or was it decided to break a pond on the site of the path? No problem, the landscape changes without the help of jackhammers and brute force.
  • It works well in all climates and areas. In dry areas, it is an excellent cover for those areas of land where nothing will be planted. And in areas with higher humidity, it is valued for its drainage qualities, since puddles do not form on it.
  • The affordable price of marble chips is another advantage, especially if local marble is used rather than more expensive imported marble.
  • And finally, the aesthetics, the perception of the crumb, the unique sound it makes when walking and the impression of softness of the coating are the reasons why this one of the oldest hard materials used for paths and paths will always be perceived as the softest.

Advantages of marble chips

Marble chips were invented many centuries ago, in ancient Greece they made floors in buildings and paths in gardens from it. However, to this day, it does not lose its relevance and relevance due to its excellent performance.

  • Crushed marble is not radioactive, so it can be used in construction without restrictions.
  • Heat resistance and frost resistance. Marble does not absorb moisture, therefore, at sub-zero temperatures, it is not threatened by small cracks that appear due to freezing of the liquid.
  • Durability
  • Fire resistance and fire safety (marble does not spark).
  • A rich selection of colors and shades allows you to make the landscape drawing unique.

For the landscape, this material has a number of undeniable advantages:

  • when using marble chips, the site requires a minimum of care, since weeds do not grow under it;
  • using this material, you do not need to worry about changes in soil temperature, it significantly compensates for them;
  • protects the soil from overheating and drying out, while providing excellent drainage;
  • a garden using marble chips always looks elegant and tidy.

In landscape design, marble chips are used for:

  • arrangement of paths, paths and driveways;
  • creation of flower beds and flower beds;
  • design of landscape elements (arbors, fountains, sculptures);
  • decorating flowerpots and planters;
  • creating alpine gardens;
  • as mulch.

Characteristics of marble chips for the landscape

Marble chips are a by-product obtained from marble quarries. Depending on the size of the fractions, it is divided into:

  • crushed marble, which, in turn, is divided into large (20 – 70 mm), medium (10-20 mm) and small (5-10 mm);
  • marble chips or another name for marble rice (2.5 – 5 mm);
  • screening ( 0 – 5 mm);
  • flour (0 – 2.5 mm);
  • dust (less than 0.1 mm).

For footpaths, marble crushed stone of medium and small fractions is suitable. If they plan to fill the driveway for the car, then it is better to use larger fractions.

Design ideas with marble chips in the garden

  • Paths. Erased borders. If you plant plants in such a way that they “go” beyond the edges of the path, then the impression of a natural path, a soft form, will be created. For this, creeping plants are suitable, softly lying on the surface, but not blocking the entire path.
  • Combination with larger stones. To diversify a large area, you can add stones of different shapes. In addition to creating accents, they can perform a practical task, for example, they mask the drainage system from pipes, or set the backlight.
  • Stone border. A sharp transition from the path to planting in the ground can create the effect of incomplete design. In this case, this border is removed with the help of large stones. Thus, outlining the pattern of the walking path and erasing the border, creating a neat finished look of the garden.
  • Flowerbeds. Marble chips in the flower bed create a pattern that emphasizes the beauty of the plants or flowers planted on it, or it can help bring some mood to the flower garden. This is achieved through a combination of crumb sizes and colors. Colored marble chips in the flower bed can repeat the shades used in the construction of the house, thereby creating a single harmonious look of the space.
  • Dry stream . Water always attracts and attracts a person. The idea of ​​​​creating a reservoir or stream on your backyard came to mind, perhaps, to every owner. However, ideas are not always easy to implement, and installation and operation difficulties arise. Fortunately, solutions come to the rescue, which are just as beautiful, in fact, and much simpler in implementation. For a dry stream or reservoir, marble is used in a color as close as possible to the shade of water. To enhance the effect, a bridge is installed over the dry stream, and ducks or artificial water lilies are launched into the dry pond.
  • Pools and fountains . If there is already a reservoir on the site, then with the help of marble chips you can decorate the bottom, create a drawing or lay out a pattern that imitates the movement of water. For these purposes, mainly crumbs of small fractions are used.
See also:   How to cover the vine for the winter video

How to make a path from marble chips with your own hands

What’s the point of having a well-maintained yard if walking through it is a kind of quest, where in no case can you step on mom’s favorite flowers, or leave footprints on dad’s perfectly even lawn?

  • Of course, you can spend more than one day of a precious vacation, laying a path of heavy cobblestones, or laying out tiles. However, simple marble rubble, not inferior in performance, will save not only strength and money, but also precious time.
  • To create a path from marble chips, no special skills or education are required. 1-2 days of work is enough and the personal plot will have its own pedestrian zone, allowing you to enjoy the perfect landscape design without fear of spoiling it.

Helpful Hints

  • The footpath is easy to set up because it does not require a large excavation of the ground, it is enough to dig 10-15 cm. In addition, the paths can be shaped either straight or curved, and you do not have to worry about maintaining the width or fitting the stones, since the marble rubble will take any conceived form;
  • however, to give structure and stability to the path, it must have a dense, rammed base. For clay soil, there is no need for additional reinforcement, since the soil itself has the necessary hardness characteristics. In areas with sandy soil, it is necessary to create a substrate of compacted stone (it is best to use a combination of ¾ stones with a fraction of 2.5-10 mm and ¼ stone dust). Laying geotextile under the path will protect it from weeds;
  • Since marble crushed stone is a mobile material, when arranging paths, it is important to take care that it does not crumble on the sides. To do this, for example, galvanized steel sheets are installed along the edges. It is a durable material that is malleable enough for curved lines. You can also use wood, brick, large stones, or even plastic edging;
  • the height of the crushed stone backfill should be 0.5 – 1 cm lower than the garden surface, otherwise it will spill over the edges of the path.

Step-by-step instructions for arranging a path from marble rubble

  • The first step is to decide on the shape and size of the track. Using a garden hose or a long rope, it is convenient to model the future path, assess the need for bends or turns. And then with spray paint outline the area of ​​\u200b\u200bfuture work. Instead of paint, you can drive in pegs and make the borders with a rope stretched between them.
  • With a shovel, remove the soil within the indicated boundaries to a depth of 10-15 cm. This shape of the shovel will make the sides of the trench as straight as possible, and the bottom more even. From time to time it is necessary to check the depth of the trench with a tape measure or ruler to make sure that it turns out to be the same depth in all areas.

Tip: it is better to place the removed soil on a tarpaulin or stretcher, this will make it easier to remove it

  • Level the bottom of the trench with a rake and compact the soil. For these purposes, a small manual lawn roller is perfect.
  • Pour small crushed stone or gravel mixed with stone flour to a height of approximately 5-7 cm at the bottom of the trench. Level the surface with a rake.
  • Using a garden hose or watering can to dampen the surface, this will not only suppress dust, but also help with further compaction. The surface should be compacted and leveled again.
  • On a compacted stone substrate, roll out a layer of geotextile fabric with the shiny side up. To lay the fabric in the bends, it is necessary to make appropriate cuts at the turning points, overlap the edges of the cut on the inside, and allow the edges to separate on the outside.

Tip: to fix the geotextile on the surface, you can use toothpicks or pins, so it will not stray at the last stage when filling the top layer with marble rubble. Or, this task can be performed by a side edging if it is installed after laying the geotextile

  • In order for the width of the track to be the same all the way, it is necessary to make a spacer rod for the side edging. To do this, a wooden block is taken, a little longer than the intended track, and two grooves are cut out on it, so that it can be installed on top of galvanized steel, and it can slide along it, controlling the width along the entire length of the trench.
  • Press lightly to install the side trim. Then use a hammer to drive it into the ground. For convenience, you can use a wooden block, this will allow you not to hit the steel and not damage the galvanization, thus preventing further corrosion. During installation, it is important to ensure that the edging goes straight in. After installation, the outer side should be sprinkled with earth.
  • Pour crushed stone not reaching 1 cm to the top edge of the trench. Spread it evenly with a rake, making sure that no edge of the geotextile is visible on the surface.
  • Plant plants or flowers along the path.
  • From time to time, the path must be leveled with a rake, and, if necessary, pour crushed stone.

Caring for marble chips on the site

Landscape stones such as white marble, for example, add flair to the site without breaking the bank. Marble chips can replace mulch for plants in the garden, create a feeling of cleanliness and freshness in the yard.

Due to its ease of use and beautiful appearance, it is increasingly found in gardens and landscaping. However, marble chips need regular cleaning. The rules of care are simple and do not require much time, however, they help the material to maintain a beautiful appearance for a long time.

Care instructions

  • Collect the top layer of marble chips, put it on a tarpaulin or polyethylene.
  • Wash with water from a garden hose or watering can. The pressure should be strong enough to remove the upper dirt, but at the same time the stones themselves should not scatter.
  • Let the marble dry in the sun.
  • Transfer the stones to the bathroom or a basin of water. If the marble is white – add a bleach solution, if colored – detergent. Soak the stones overnight. If necessary, mix the stones with a mop or broom.
  • Rinse the stones with plenty of clean water.
  • Lay them out on a tarpaulin or plastic sheet and let them dry well.
  • Return the marble chips to their place.

What is important to remember when using marble chips in the landscape as mulch?

  • Marble chips are widely used in gardening to decorate flower beds, shrubs and trees, since in this form it performs two functions at once: aesthetic – using marble of different colors and shades, you can create a unique pattern; as well as practical – it performs the function of mulching, i.e. protection and improvement of soil properties.
See also:   Buffet grape variety description photo reviews video
  • Marble chips are composed of metamorphosed limestones and, like limestone itself, are rich in calcium. When too much calcium is added to the soil, the pH of the soil can be raised. Most plants grow well in soil pH between 5.5 and 6.5. Especially when it comes to woody plants. In the case of an increase in pH, the amount of iron critical for normal plant growth in the soil becomes less, the plant can no longer consume it in the right amount. In such cases, it exhibits symptoms of iron deficiency, which appear as chlorotic leaves or needles. For example, three pine trees were planted in front of the house, and white marble chips were added as mulch. A week later, the pines began to show the first signs of iron deficiency: a dull color, a month later all three had chlorotic needles,
  • Plants with leaves also show iron deficiency in the form of loss of color in the leaves, showing green veins on the leaves, while the intervenous space becomes yellow.

What to do if the plant does not fit the mulch in the form of marble chips?

  • First, it must be removed.
  • Second, to restore the pH of the soil, this is done with a fertilizer containing ferrous sulfate, which can be purchased at any garden center. Top dressing should be carried out with caution, monitoring whether the plant responds to it.

Tip: Before using fertilizers, the pH of the soil should be checked to make sure that this is the problem of the plants.

Marble chips are an excellent material for landscape decoration, they can serve as a background for flowers and plants in flowerbeds and flower beds, and act as an independent decoration of the site in the form of a bright composition. To do this, you just need to buy marble chips and start creating bright accents in your backyard.

For a long time, marble chips have become an indispensable material for creating landscape compositions. It is often used only as a decorative ornament, but in addition to its original appearance, it has a number of undeniable advantages.

The main advantages of white marble chips:

1) it is able to reduce the intensive growth of weeds;
2) reduce temperature fluctuations in the soil;
3) protect the soil from drying out;
4) a permeable layer with crumbs will protect the lawn from standing water after rain.

You may not even have imagined before where you can use it, but after looking at the photos with marble chips selected below, you will see that it looks amazing on footpaths, when decorating ponds and fountains, as well as in decorating arches, walls and podiums. She can even lay out alpine slides and Japanese gardens, decorate flowerpots with indoor flowers and decorate the facades of buildings.

The main characteristics of marble chips

Strength is considered the most important characteristic of this material; in terms of strength, it is close to the cement floor, which cannot be said about granite chips. Due to its increased strength, it can be used when laying mosaic floors, while it lends itself perfectly to grinding and polishing, paths paved with such chips are safe even after rain, since this material is a kind of slip protection.

It is not radioactive, thanks to which it can even be used in construction without any restrictions. In the cold, it does not crack, because it does not absorb moisture, while marble is not able to strike a spark.

One cubic meter of crumbs weighs 1.5 tons. Quite often, in the construction of modern houses, it is used for finishing internal parts: window sills, steps, countertops. This finish gives the interior a special charm, sophistication and originality.

Photo of marble chips in the landscape

Every owner of a private house dreams of having an artificial reservoir, but the plan for creating it may not always be realistic. Therefore, a “dry” stream can be considered an excellent alternative in this case. You need to pick up a flat area of ​​soil, fill this area with fine gravel or light pebbles and decorate with white marble chips. Such an original solution will look very impressive and stylish.

You can complement the interior with a bridge over a “dry” stream, which is also sprinkled with white crumbs.

With the help of marble chips, you can unforgettably decorate, it would seem, even an ordinary flower bed, emphasizing its elegance. For embankment of flower beds, it is better to use large crumbs with a diameter of 20 cm, it will not create a barrier for oxygen to enter the ground, it will prevent the appearance of unwanted weeds and will keep moisture in the ground longer. At the same time, it is not necessary to use only white marble chips for the embankment; with colored chips, you can create original abstractions and unique drawings on the flower bed.

Various photos with marble chips, presented below, can change your attitude towards this material, since you can make real works of art from it, both in the garden and in the house.

Do marbles need maintenance?

If it is used for interior decoration of the house, then it does not require any special care. If it is used as a bulk droshky or for a dry stream, then over time it will become dusty and dirty from the rains.

In this case, you need to collect the top layer of crumbs and put it on polyethylene or on a tarpaulin. Wash it with high pressure water from a hose and let it dry.

To bleach white marble, put it in a basin and add some bleach. It is better to soak the pebbles for the whole night, periodically stirring it with a mop or broom. After bleaching, it is rinsed with clean water and laid out on a tarp. When the crumb dries, it must be returned to its place, and it will again delight you with an amazing snow-white shade.

Marble is an excellent material for creating an extraordinary landscape decor; it can be used not only as a background for plants and flowers, but also act as a bright composition on your backyard. In our next article, read about the use of decorative bricks.

Leave a Reply